The genesis of our Outdoor Sump System started 12 years ago with a simple question: Why allow water into your home just to pump it back out?
Since then, there have been various design updates optimizing functionality and simplifying installation. So don’t let the minimalism fool you. This design has been engineered and tested for all types of soil conditions and our current design has been engineered to achieve up to a 13-foot, 9-inch depth.
Parts are roto-molded to a consistent wall thickness of ¼” with external and internal flanges for fastening. The pots are designed to maximize strength and minimize the number of joints for straightforward assembly. The interior’s diameter is optimized to perfectly accommodate our pumps (both primary & battery backup), plus a monitoring system and all of the add-ons that will ensure your pump runs successfully for years to come.
Ordering Your Outdoor Sump Pump
Step One: Pick your Model
Our models are designed to stack sections (“pots”) on top of each other to achieve your desired height. Below are the two options for ordering an outdoor sump system that suits your budget and needs.
Basic Outdoor Sump System Components
Allows you to assemble your own system. Start with the Base Model and add as many Extension Pots as you need to accomodate the depth of your sump hole. Then simply add a pump and fittings.
Complete Outdoor Sump Systems.
A complete system that is ready to install, including pumps, fittings, float, and even waterproof rock, and no additional components required. The model numbers represents the depth each system will reach, in inches. So, simply choose the model number that corresponds with the depth you need.
Step Two: Pick your Size
BASIC OUTDOOR SUMP COMPONENTS
Start with these foundational parts, then source a pump and fittings to complete the system.
Note: Interior dimensions of each pot are 14.5″ at the narrower end and 18″ at the broader end.
Base Model
Includes:
1 x 16.5” perforated pot
1 x 16.5” perforated pot w/ 4″ hole
Top and bottom lid
Parts bag
Extension Pots
Includes:
2 x standard 16.5” pots
Parts bag
If you’re unsure how to measure the depth and order accordingly, see the FAQs in the Help section below.
COMPLETE OUTDOOR SUMP SYSTEMS
The models listed below include all of the components needed for the engineered Outdoor Sump System to be installed on site, without the need to purchase additional parts.
Note: Interior dimensions of each pot are 14.5″ at the narrower end and 18″ at the broader end.
Model OUT99
Includes 6 x 16.5” pots
Top and bottom lid
3/4HP Pump, ABS fittings, float
Waterproof rock
Model OUT115
Includes 7 x 16.5” pots
Top and bottom lid
3/4HP Pump, ABS fittings, float
Waterproof rock
Model OUT132
Includes 8 x 16.5” pots
Top and bottom lid
3/4HP Pump, ABS fittings, float
Waterproof rock
Model OUT148
Includes 9 x 16.5” pots
Top and bottom lid
3/4HP Pump, ABS fittings, float
Waterproof rock
Model OUT165
Includes 10 x 16.5” pots
Top and bottom lid
3/4HP Pump, ABS fittings, float
Waterproof rock
Step Three: Submit Order
Submit your order by completing our online order form.
Learn how our outdoor sump pump works
QUESTIONS ABOUT YOUR OUTDOOR SUMP PUMP? WE HAVE ANSWERS!
How do I assemble?
Q: I’d like to assemble my own system. How do I know the right combination of Base Model and Extensions for my needs?
A: First measure inside your basement from the basement floor to your grade outside and add on 36” Eg. My measurement from the basement floor to outside grade is 60” + 36” = 96”, so you would need 1 Base Model and 2 Extension Pot packages.
NOTE: you will always need to start with the Base Model.
How do I know which model I need?
Q: I’d like to purchase a complete system. How do I know which model I need?
A: The model numbers are the height of the Outdoor Sump System in inches, to know your size in inches, measure inside your basement from the basement floor to your grade outside and add on 36” and round up to the closet model. Eg. My measurement from the basement floor to outside grade is 76” + 36” = 112”, so you would need a Model OUT115.